Description
Reducing tee is a pipe fitting and pipe connector, which is used at the branch pipe of the main pipe.
Reducing tee is a kind of tee, which refers to the tee with different diameters of branch pipe and other ends.
According to the manufacturing method, it can be divided into jacking, pressing, forging, casting, etc.
According to manufacturing standards, it can be divided into national standards, American standards, German standards, Japanese standards, Russian standards, etc.
Technical data sheet
| Specification Of Equal Tee | |||||||
| Nominal Diameter | OuteideDiamster | Center to End | |||||
| D1 | D2 | ||||||
| DN | NPS | Series A | Series B | Series A | Series B | C | M |
| 15x15x15 | 1/2×1/2×1/2 | 21.3 | 18 | 21.3 | 18 | 25 | 25 |
| 15x15x10 | 1/2×1/2×3/8 | 21.3 | 18 | 17.3 | 14 | 25 | 25 |
| 15x15x8 | 1/2×1/2×1/4 | 21.3 | 18 | 13.7 | 10 | 25 | 25 |
| 20x20x20 | 3/4×3/4×3/4 | 26.9 | 25 | 26.9 | 25 | 29 | 29 |
| 20x20x15 | 3/4×3/4×1/2 | 26.9 | 25 | 21.3 | 18 | 29 | 29 |
| 20x20x10 | 3/4×3/4×3/8 | 26.9 | 25 | 17.3 | 14 | 29 | 23 |
| 25x25x25 | 1x1x1 | 33.7 | 32 | 33.7 | 32 | 38 | 38 |
| 25x25x20 | 1x1x3/4 | 33.7 | 32 | 26.9 | 25 | 38 | 38 |
| 25x25x15 | 1x1x1/2 | 33.7 | 32 | 21.3 | 18 | 38 | 38 |
Characteristic
Reducing tee is expressed as follows: for example, “T4” × four × 3.5 “refers to a reducing tee with the same diameter of four inches and the reducing diameter of 3.5 inches.
The material is generally 10 # 20 # A3 Q235B, and the outer diameter range is 2.5 ″ – 60 ″.
The pressure rating is sch5s, sch10s, sch10, sch20, sch30, sch40s, STD, sch40, sch60, sch80s, XS; Sch80、Sch100、Sch120、Sch140、Sch160、XXS。
Application
Reducing tees are widely used in the construction and maintenance of petrochemical, oil and gas, liquefied gas, chemical fertilizer, power plant, nuclear power, shipbuilding, papermaking, pharmaceutical, food hygiene, urban construction and other industries.
